1.The tools should be kept above 0 ℃. Short time transportation or on-site standby below 0 ℃ will not affect the tools. However, if the time is long, the tools should be kept above 0 ℃. In addition, the assembled tools should be kept at – 10 ℃ for no more than 7 days.
2.In the high temperature environment, the tools should not be placed in the direct sunlight. If they must be stored outdoors, the surface of the tools can be covered with canvas or other shading materials.
3.After construction, the tools shall be washed with clean water and then with soapy water.
4.When the multiple activation bypass valve is activated for to go up and down the drill floor and handle many times , the wire guardshall be taken, and the lifting and placing shall be stable.
5.When placing and checking on site, use 3-4 wooden squares or steel pipes to level the multiple activation bypass valve.
6.After pulling out each time, the multiple activation bypass valve each part thread should be checked if damaged or broken
If you are interested in Vigor’s Multiple Activation Bypass Valve (MCBV), please do not hesitate to get in touch with us, we will provide you with the best quality products and the most intimate product service.
Post time: Jan-22-2024
